0

0 items

Cart

MidNite Solar MNPV6-250 Combiner Box

by MidNite Solar

(No reviews yet) (0)
Not Available

SKU: ALG-053-03081

MPN: ALG-053-03081

SHIPPING: Calculated at Checkout

Description
Midnite Solar Combiner Box - MNPV6-250 Midnite Solar, Combiner box with disconnect handle & 3 breaker busbar, Add 300VDC or 120/240VAC DIN mount breakers, MNPV6-250 The MNPV6 Disco is very flexible. It is ETL listed for AC and DC. This allows you to configure it for several different uses. It will work with 1-6 of MidNite Solar's 150 volt DC breakers. The combiner also works with 1 of Midnite Solar's 600 volt DC breakers for a grid tie disconnect. You can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. Load Break rated.This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick. MidNite Solar has 16 and 20 amp 600VDC breakers. They stock 120V and 240VAC breakers. These powder-coated aluminum rainproof array combiners will accept DIN-mount 150 V circuit breakers, MidNite 300 VDC breakers, Midnite 600 VDC breakers, or 600 VDC fuse holders for grid-tie arrays. A plastic cover provides a dead front for safety and can be knocked out for either breakers or fuse holders. Both a negative and ground busbar are included. The aluminum NEMA 3R enclosures are approved to be mounted at angles from 90° to 14° (vertical to 3/12 slope). Listed to UL 1741 for the U.S.A. and Canada. Breakers and fuse holders are not included. The MNPV3 will accept three single-pole 150 VDC (MNEPV) breakers or two 600/1,000 VDC fuse holders. Includes a 60 A positive busbar, six-position PV-negative busbar and a six-position ground busbar. A single 300 VDC breaker from 7 to 50 A may be installed as a disconnect (no combining busbar). The MNPV6 will accept six single-pole 150 VDC breakers or four 600/1,000 VDC fuse holders. Includes 15-position PV-negative bus bar, 14-position ground busbar, 120 A positive bus bar for breakers and 80 A busbar for fuses. The positive busbar may be split to support two grid-tie inverters or two charge controllers. Most charge controllers and grid-tie inverters can have a common negative PV bus (except Schneider XW and BlueSky). The MNPV6-250 will hold up to three single-pole 300 VDC circuit breakers for charge controllers accepting input voltages up to 300 VDC. The MNPV12 will accept 12 single-pole 150 VDC breakers or ten 600/1,000 positive VDC fuse holders. It includes a 15-position PV-negative busbar, 15-position ground bus bar, and two 200 A Plus busbars for breakers or fuses. Positive busbars can be combined or separated to support two grid-tie inverters or two charge controllers. Most charge controllers and grid-tie inverters can have a common negative PV bus (except Schneider XW and BlueSky). The MNPV12-250 will hold up to six single-pole 300 VDC circuit breakers for charge controllers accepting input voltages up to 300 VDC. The MNPV16 will accept 16 single-pole 600 VDC fuse holders. Includes 21-position PV-negative busbar, 18-position ground busbar, and 240 A positive and negative busbars. The MNPV16-24 PV combiner can hold up to 24 single-pole 150 VDC breakers. The 240 A busbar can take two dozen 10 A breakers or sixteen 15 A breakers or twelve 20 A breakerbreakers or eight 30 A breakers. This combiner is useful for combining Aquion battery stacks due to its capacity for larger cables. The MNPV16-250 will accept 12 single-pole 300 VDC breakers. Includes 21-position PV-negative busbar, 18-position ground busbar, and 240 A positive and negative busbars. The MNPVxx-1000 combiners use 1,000 VDC fuse holders and fuses, which are not included and must be added. The MNPV10-1000 only can be split into two output circuits. Features User Friendly - Works for a variety of applications. Vertical wall mount, pole mount or sloped roof mount to 14 degrees incline (3/12 roof pitch). Can be used as an AC Micro combiner or a DC off grid combiner. Efficient- Nema 3R aluminum enclosure (no rust, won’t turn to dust). Has six spaces for virtually any configuration needed. Safety - Uses Midnite Solar's Din Rail circuit breakers.
Product Information
  • Manufacturer: MidNite Solar
  • Rating: UL1741
  • Weight: 4.00 lbs
  • Lockable: Yes
  • Dead-Front: Custom Molded Plastic Dead-Front
  • Dimensions: 16.00 x 5.00 x 14.00 inches
  • Technology: Combiner Box
  • Enclosure Rating: NEMA 3R (Indoor/Outdoor)
  • Mounting Options: Vertical Wall Mount, Pole Mount or Sloped Roof Mount to 14 Degrees Incline (3/12 Roof Pitch)
  • Output Wire Range: 14 to 1/0
  • Enclosure Material: Powder Coated Aluminum with Stainless Hardware
  • Maximum OCPD Rating: 63 Amps
  • Birdhouse Compatible: No
  • Busbar Output Rating: 120 Amps
  • Number of PV Strings: 6 Strings
  • Lug Temperature Rating: 90°C
  • Wire Range for String Input: 14 to 6 AWG
  • Over-Current Device Part Number: MNEPV1 to 63
  • Maximum Number of Output Circuits: 1
Downloads
Reviews
No reviews yet
Trusted vendors Greenside takes the guesswork out of finding high quality components.
Trade assurance Protect against damage and late deliveries with Greenside Assurance.
Simple payments Forget tracking bills, make one simple payment through Greenside.

Have questions?

Use Greenside to build your material list and receive multiple distributor quotes. Then easily compare and safely pay for your materials all in one place.

Get answers
MidNite Solar MNPV6-250 Combiner Box

MidNite Solar MNPV6-250 Combiner Box

by MidNite Solar

0 options

Sorted by price

Sign In

All Brands